- 0
Secondary cleaner
Installation
To install the DirtWhacker Secondary belt cleaners the following needs to be noted:
CAD Drawings
Make use of the CAD drawing to verify that the DirtWhacker Secondary & Tertiary belt cleaner will fit your present conveyor belt structure.
Dimensions
Dimensioned drawings are provided in Adobe Acrobat PDF format for your convenience, if you do not have access to a CAD package.
Identification
Correctly identify the belt-joints used. The next step will be to recognize any special belt applications. The drawings listed are in the Adobe Acrobat PDF format and they will assist you in correctly positioning the DirtWhacker Secondary and Tertiary Belt Cleaners
Procedure 01
There are two set ways of installing the DirtWhacker Secondary and Tertiary Belt Cleaners. This is the first method.The installation steps laid out here in correct order would assist in making the fitting of the DirtWhacker Secondary and Tertiary Belt Cleaners a success. Please note that the four drawings, identified at the start of the procedure, need to be printed for on-site reference
Procedure 02
There are two set ways of installing the DirtWhacker Secondary and Tertiary Belt Cleaners. This is the second method. The installation steps laid out here in correct order would assist in making the fitting of the DirtWhacker Secondary and Tertiary Belt Cleaners a success. Please note that the drawings, identified at the start of the procedure, need to be printed for on-site reference
Instructions Assembly Secondary Cleaner
DW 2901 : SECONDARY CLEANER
APPLICATION - SIDE VIEW DIMENSIONS
DW 2902 : SECONDARY CLEANER
APPLICATION - REAR VIEW DIMENSIONS
DW 2903 : SECONDARY CLEANER
APPLICATION - REAR VIEW DIMENSIONS
DW 2921 : SECONDARY CLEANER
APPLICATION - SIDE VIEW INSTALLATION IDENTIFICATION
DW 2922 : SECONDARY CLEANER
APPLICATION - REAR VIEW INSTALLATION IDENTIFICATION
DW 2923 : SECONDARY CLEANER
APPLICATION - TOP VIEW INSTALLATION IDENTIFICATION
DW 2931 : SECONDARY CLEANER
APPLICATION - REVERSIBLE BELT
DW 2932 : SECONDARY CLEANER
APPLICATION - BELT WITH VULCANIZED JOINTS
DW 2933 : SECONDARY AND TERTIARY CLEANER
APPLICATION - BELT WITH VULCANIZED JOINTS
DW 2934 : SECONDARY CLEANER
APPLICATION - BELT WITH MECHANICAL JOINTS
DW 2935 : SECONDARY AND TERTIARY CLEANER
APPLICATION - BELT WITH MECHANICAL JOINTS
DW 2936 : SECONDARY CLEANER
APPLICATION - BELT WITH INSUFFICIENT TENSION
DW 2937 : SECONDARY CLEANER
APPLICATION - BELT WITH VULCANIZED JOINT SNUBBED
DW 2938 : SECONDARY AND TERTIARY CLEANER
APPLICATION - BELT WITH VULCANIZED JOINT SNUBBED
DW 2939 : SECONDARY CLEANER
APPLICATION - SNUBBED BELT WITH MECHANICAL JOINTS
DW 2940 : SECONDARY AND TERTIARY CLEANER
APPLICATION - SNUBBED BELT WITH MECHANICAL JOINTS
DW 2941 : SECONDARY CLEANER
APPLICATION - INSTALLATION STEPS
DW 2942 : SECONDARY CLEANER
APPLICATION - CUT-OUT DIMENSIONS
DW 2943 : SECONDARY CLEANER
APPLICATION - OPTIMAL INSTALLATION IDENTIFICATION
DW 2944 : SECONDARY CLEANER
APPLICATION - DEGREE OF COLLAPSE INSTALLATION IDENTIFICATION